Team Associated RC10 B6.2D Team 1/10 2wd Electric Buggy Kit

Location:
Stock: 1
Low Price: $314.99

The Team Associated RC10 B6.2D Team 1/10 2wd Electric Buggy Kit carries on the AE tradition of domination. The B6.2D includes both Layback and Laydown transmission assemblies to fine tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor sharp feel and control.

Combine this with high end features like an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a revised slipper assembly. The setups and tuning parts are interchangeable between the B6.2 and B6.2D configurations, and offer the speed, durability and lineage expected of a true champion.

NOTE: Painted body, electronics, wheels and tires shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.  

 

Features:

  • Symmetric 73mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position
  • Rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment
  • Bolt-on +1 steering block arms for improved steering response
  • Body design with lower center of mass
  • Clear body and wing included
  • Front wing mount and front wing included
  • Outer rear hinge pins captured with bolt head and lock nut for increased durability
  • Updated left side rail with motor fan mount (fan not included)
  • 67mm CVA bones for reduced bone plunge and minimized friction at drive pin
  • 13g aluminum chassis weight included for improved mass balance and easy electronics removal
  • 7mm aluminum clamping wheel hexes
  • Ball differential included
  • Both Layback and Laydown Stealthâ„¢ transmission assemblies included to fine tune mass balance to track conditions
  • Differential height adjustment with 0, 1, 2, and 3mm inserts included
  • 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments
  • Heavy-duty V2 routed graphite front shock tower with tower guard
  • Heavy-duty V2 routed graphite rear tower, standard
  • V2 12mm Big Bore threaded aluminum shock with X-rings
  • Machined shock pistons for more precise fit and smoother operation
  • V2 springs for a more reactive and nimble feel
  • Aluminum rear ballstud mount with three link position options
  • Lightweight aluminum one-piece top shaft and gear
  • Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag) 

Specifications:

Scale: 1:10
Power: Electric
Length: 387mm (15.2")
Width: Varies*
Weight: 758g (1.67 lbs) (chassis only)
Wheelbase: Varies*
Transmission Ratio: 2.60:1

Needed to Complete:
  • 1:10 scale electric motor
  • Electronic speed control
  • 7.4V, 7.6V LiPo, 6.6V LiFe with "shorty" battery dimensions 
  • Battery charger 
  • 2-channel surface transmitter
  • 2-channel receiver
  • Steering servo 
  • Polycarbonate-specific spray paint for body
  • 1:10 scale off-road wheels and tires
  • Pinion gear
  • Other helpful items: Silicone shock fluid, Silicone diff fluid, FT body scissors (#1737), FT body reamer (#1499), FT hex/nut driver set (#1519), CA tire adhesive (#1597), Hobby knife, Needle nose pliers, Wire cutters, Soldering iron, Calipers or a precision ruler

This product was added to our catalog on January 27, 2020