The Scale By Chris V2 Race Can is a 3D printed miniaturized replica that adds that perfect finishing touch to your scale build. This blue race can features a printed handle and lid, with recessed logo and can marking details, as well as a crystal clear fill tube and black fill tube plug. This can will look great in the back of a truggy, a body with a full depth bed, or inside the Scale by Chris Medium Size Crate (SBC026MB)! The can measures approximately 24mm deep, 24mm wide and 52mm tall at the lid (not including filler tube). This can be secured using a rubberized glue, or by drilling a hole in the bottom and using a screw through the body to hold the can in place.
Printed at .18mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever outsourced, meaning Chris puts his hands on every part before it goes out the door. All this effort is done to create a higher quality finished product, with the details you need to take your build to the next level.
NOTE: As is the case with most 3D printed items, some light finish work may be needed to remove excess material. Simply use a sharp hobby knife to carefully remove small strings and straggler layer lines as needed.
This product was added to our catalog on April 6, 2017