The Tinyhawk II Freestyle Bind N Fly was developed following the groundbreaking performance of its predecessor and now comes reinvented and ready for action. This is the perfect beginner outdoor quad.
Featuring a power system focused on control and flight time, the TH2 Freestyle is equipped with 1103 7000kV motors in order to achieve the optimal RPM needed to maximize flight time and efficiency. The Avan Rush 2.5-inch props ensure that grip and thrust are optimized in any situation. The frame has been redesigned to accommodate a higher quality camera, which means that the FPV experience is greatly enhanced, with much greater clarity for navigating any environment. Coupled with an 8x stronger VTX than the original, you'll never have to worry about signal strength. Constructed from aerospace grade 3k woven carbon fiber, durability is maximized without sacrificing weight - it's still only 79g even with the battery! Plus it looks good too - the screen print design gives it a unique look that will turn heads.
Durable aerospace grade 3k woven carbon fiber
F4 (MATEKF411RX Firmware) Flight Controller
RunCam Nano 2 FPV camera
More powerful VTX with 25/100/200mw power levels
Smart Audio connected
FRSKY D8 compatible
Efficient Emax 1103 7000Kv brushless motors
Avan Rush 2.5" props
Dry Weight: 49g
All Up Weight: 79g with 2x 450mAh 1S battery
Frame Material: Carbon Fiber
Stator Size: 1103
Propeller Mount: T-mount, 1.5mm shaft
Propeller: Avan Rush 2.5"
All-In-One (AIO) Flight Controller:
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode**)
Battery Connector: JST-PH2.0 Duo
VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)*
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3" 700TVL CMOS
Smart Audio Connected
(1) Tinyhawk II Freestyle BNF
(2) EMAX 450mAh 1S HV Battery
(1) 1S USB LiPo Charger
(1) Screwdriver + Hardware Kit
* Even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Tinyhawk II Freestyle is set to stay at 25mW until you arm the motors.
** Be advised that this model is NOT compatible with the latest 2019+ FrSky ACCESS protocol transmitters without the use of FrSky's external XJT module for ACCESS transmitters for D8 mode capability.
*** Ham radio license required for use in North America.
**** Comes preinstalled with a FrSky-compatible receiver - D8 mode only!
This product was added to our catalog on October 16, 2020